Lines Matching full:partner
38 partner** and will focus on diagnosing issues locally.
89 misconfiguration, or no connection at the link partner. In this case,
192 Link partner advertised link modes: 10baseT/Half 10baseT/Full
194 Link partner advertised pause frame use: Symmetric Receive-only
195 Link partner advertised auto-negotiation: Yes
196 Link partner advertised FEC modes: Not reported
268 partner. You can increase the power limit as needed.
330 the state of the link partner. The results from the cable test will help in
349 results can be influenced by the link partner's state. Refer to the
378 local hardware and the link partner**. The accuracy and reliability of the
387 partner.
389 - Some PHYs may report a **Short within Pair** if the link partner is in
426 - If the link partner is in **admin down** state or powered off, you might
430 or loose connections. Verify the link partner is powered on and in the
485 - **Next Steps**: Re-run the test, verify the link partner's state, and inspect
488 Verify Link Partner PHY Configuration
492 essential to verify the configuration of the link partner’s PHY. Mismatches in
517 with the link partner. In the worst case, there will be no common link modes,
538 - **No or empty "Link partner advertised link modes"**.
540 - **"Link partner advertised auto-negotiation:"** will be **"no"** or not
546 partner is actually configured for **Full Duplex**.
548 - Some PHYs may not work reliably if the link partner switches from one