Lines Matching full:pse

31 over Data Line) and **PoE** (Clause 33 PSE).
221 or the **PSE** (Power Sourcing Equipment) is managed by proprietary user-space
230 - **Command:** `ethtool --show-pse <interface>`
234   1. **PSE Not Supported**:
236      If no PSE is attached or the interface does not support PSE, the following
241         netlink error: No PSE is attached
250         PSE attributes for eth1:
251         PoDL PSE Admin State: enabled
252         PoDL PSE Power Detection Status: delivering power
254   3. **PoE (Clause 33 PSE)**:
260         PSE attributes for eth1:
261         Clause 33 PSE Admin State: enabled
262         Clause 33 PSE Power Detection Status: delivering power
263         Clause 33 PSE Available Power Limit: 18000
270   - **Command:** `ethtool --set-pse <interface> c33-pse-avail-pw-limit <limit>`
276       ethtool --set-pse eth1 c33-pse-avail-pw-limit 18000
277       ethtool --show-pse eth1
283       Clause 33 PSE Available Power Limit: 18000
293     is not managed by the Linux kernel's **PSE-PD** framework (i.e., it is
298   - **PSE Admin State Disabled**:
300     - If the `PSE Admin State:` is **disabled**, enable it by running one of
305          ethtool --set-pse <devname> podl-pse-admin-control enable
307       or, for Clause 33 PSE (PoE):
309          ethtool --set-pse <devname> c33-pse-admin-control enable
311     - After enabling the PSE Admin State, return to the start of the **Check
316     **PSE**. Check for potential issues such as a short circuit in the cable,
317     insufficient power delivery, or a fault in the PSE itself.
665       PSE attributes for eth1: