Lines Matching full:radio
26 5. Radio Kill Switch
50 radio operation and to ensure electromagnetic compliance (EMC). These
71 system configuration do not cause the EMC and radio operation to be
123 For example, to disable the radio on driver loading, enter:
177 0 RF kill not enabled (radio on)
178 1 SW based RF kill active (radio off)
179 2 HW based RF kill active (radio off)
180 3 Both HW and SW RF kill active (radio off)
186 0 If SW based RF kill active, turn the radio back on
187 1 If radio is on, activate SW based RF kill
193 based RF kill from ON -> OFF -> ON, the radio will NOT come back on
196 5. Radio Kill Switch
199 Most laptops provide the ability for the user to physically disable the radio.
201 software to turn the radio off and on. On other laptops, however, the switch
203 calls to turn the radio off and on. This is referred to as a "software based
230 off No power management. Radio is always on.
237 Power management works by powering down the radio after a certain
239 radio. Once powered down, the radio remains in that state for a given
243 When the radio is asleep, the access point sending data to the station
256 iwconfig eth1 power off Disables radio power down
257 iwconfig eth1 power on Enables radio power management to
274 wait before powering the radio and querying the access point for buffered