Lines Matching full:dpll

3 name: dpll
5 doc: DPLL subsystem.
12       working modes a dpll can support, differentiates if and how dpll selects
18         doc: input can be only selected by sending a request to dpll
22         doc: highest prio input pin auto selected by dpll
28       provides information of dpll device lock status, valid values for
34           dpll was not yet locked to any valid input (or forced by setting
40           dpll is locked to a valid signal, but no holdover available
44           dpll is locked and holdover acquired
48           dpll is in holdover state - lost a valid lock or was forced
50           when dpll lock-state was already DPLL_LOCK_STATUS_LOCKED_HO_ACQ,
51           if dpll lock-state was not DPLL_LOCK_STATUS_LOCKED_HO_ACQ, the
52           dpll's lock-state shall remain DPLL_LOCK_STATUS_UNLOCKED)
59       information of dpll device lock status error.
65           dpll device lock status was changed without any error
70           dpll device lock status was changed due to undefined error.
76           dpll device lock status was changed because of associated
78           This may happen for example if dpll device was previously
85           This may happen for example if dpll device was previously
93       the dpll lock-status is DPLL_LOCK_STATUS_HOLDOVER.
132     doc: type of dpll, valid values for DPLL_A_TYPE attribute
136         doc: dpll produces Pulse-Per-Second signal
140         doc: dpll drives the Ethernet Equipment Clock
237       measured signal phase difference between a pin and dpll device
246     name: dpll
292           the dpll lock-status is DPLL_LOCK_STATUS_HOLDOVER. This could
446         Get id of dpll device that matches given attributes
447       attribute-set: dpll
451         pre: dpll-lock-doit
452         post: dpll-unlock-doit
465         Get list of DPLL devices (dump) or attributes of a single dpll device
466       attribute-set: dpll
470         pre: dpll-pre-doit
471         post: dpll-post-doit
492       doc: Set attributes for a DPLL device
493       attribute-set: dpll
497         pre: dpll-pre-doit
498         post: dpll-post-doit
525         pre: dpll-lock-doit
526         post: dpll-unlock-doit
546         - dump request with target dpll - list all the pins registered with
547           a given dpll device
548         - do request with target dpll and target pin - single pin attributes
553         pre: dpll-pin-pre-doit
554         post: dpll-pin-post-doit
591         pre: dpll-pin-pre-doit
592         post: dpll-pin-post-doit