Lines Matching +full:high +full:- +full:resolution
10 Addresses scanned: I2C 0x2c - 0x2f
15 - Yuan Mu (Winbond Electronics)
16 - Rudolf Marek <[email protected]>
20 -----------------
36 -----------
44 sets of 6-pin CPU VID input.
47 If your motherboard maker used the reference design, the resolution of
48 voltage0-2 is 2mV, resolution of voltage3/4/5 is 16mV, 8mV for voltage6,
49 24mV for voltage7/8. Temp1-4 have a 0.25 degree Celsius resolution,
50 temp5-6 have a 1 degree Celsiis resolution.
53 Temp1-4 have 2 possible types. It can be read from (and written to)
54 temp[1-4]_type.
56 - If the value is 3, it starts monitoring using a remote termal diode
58 - If the value is 6, it starts monitoring using the temperature sensor
61 Temp5-6 can be connected to external thermistors (value of
62 temp[5-6]_type is 4).
66 the low voltage limit or over the high voltage limit.
68 above the high temperature limit, and wears off only after the measured
76 to manual mode, you need to check the value of temp[1-6]_fan_map, make
82 mode using temp[1-6]_pwm_enable, 2 is Thermal Cruise mode and 3
91 if tempX_input < thermal_cruiseX - toleranceX, the chip will decrease
98 implementation is quite different, giving you a finer-grained control.
110 -----
112 Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and