Lines Matching +full:0 +full:- +full:datasheet
10 https://www.analog.com/static/imported-files/data_sheets/ADT7408.pdf
20 http://www.atmel.com/Images/Atmel-8852-SEEPROM-AT30TSE002A-Datasheet.pdf
22 http://www.atmel.com/Images/Atmel-8868-DTS-AT30TSE004A-Datasheet.pdf
36 http://datasheets.maxim-ic.com/en/ds/MAX6604.pdf
68 Datasheet:
70 https://www.onsemi.com/pub_link/Collateral/CAT34TS02-D.PDF
72 https://www.onsemi.com/pub/Collateral/CAT6095-D.PDF
78 http://www.st.com/web/en/resource/technical/document/datasheet/CD00157556.pdf
80 http://www.st.com/web/en/resource/technical/document/datasheet/CD00157558.pdf
82 http://www.st.com/web/en/resource/technical/document/datasheet/CD00266638.pdf
84 http://www.st.com/web/en/resource/technical/document/datasheet/CD00225278.pdf
86 http://www.st.com/web/en/resource/technical/document/datasheet/DM00076709.pdf
90 Datasheet:
99 Addresses scanned: I2C 0x18 - 0x1f
102 Guenter Roeck <linux@roeck-us.net>
106 -----------
113 The driver auto-detects the chips listed above, but can be manually instantiated
117 temperature sensor at address 0x18 on I2C bus #1::
120 # echo jc42 0x18 > /sys/bus/i2c/devices/i2c-1/new_device
127 Per JC 42.4 specification, the hysteresis threshold can be configured to 0, 1.5,
131 temp1_crit_hyst. Other hysteresis attributes are read-only.
138 -------------