Lines Matching +full:power +full:- +full:monitor
10 Addresses: I2C 0x40 - 0x4f
20 Addresses: I2C 0x40 - 0x4f
30 Addresses: I2C 0x40 - 0x4f
40 Addresses: I2C 0x40 - 0x4f
50 Addresses: I2C 0x40 - 0x4f
60 Addresses: I2C 0x40 - 0x4f
70 Addresses: I2C 0x40 - 0x4f
80 -----------
82 The INA219 is a high-side current shunt and power monitor with an I2C
86 The INA220 is a high or low side current shunt and power monitor with an I2C
89 The INA226 is a current shunt and power monitor with an I2C interface.
92 INA230 and INA231 are high or low side current shunt and power monitors
93 with an I2C interface. The chips monitor both a shunt voltage drop and
96 INA260 is a high or low side current and power monitor with integrated shunt
99 The SY24655 is a high- and low-side current shunt and power monitor with an I2C
102 calculate average power for use in energy conversion.
104 The shunt value in micro-ohms can be set via platform data or device tree at
105 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
110 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
117 ---------------------
123 power1_input Power(uW) measurement channel
128 ------------------------------------------------------------------------
143 power1_crit Critical high power
144 power1_crit_alarm Power critical high alarm
150 ------------------------------
153 power1_average average power from last reading to the present.
158 - Configure `shunt_resistor` before configure `power1_crit`, because power
160 - Because of the underlying register implementation, only one `*crit` setting