Lines Matching +full:one +full:- +full:time +full:- +full:programmable
10 Addresses: I2C 0x40 - 0x4f
20 Addresses: I2C 0x40 - 0x4f
30 Addresses: I2C 0x40 - 0x4f
40 Addresses: I2C 0x40 - 0x4f
50 Addresses: I2C 0x40 - 0x4f
60 Addresses: I2C 0x40 - 0x4f
70 Addresses: I2C 0x40 - 0x4f
80 -----------
82 The INA219 is a high-side current shunt and power monitor with an I2C
84 programmable conversion times and filtering.
99 The SY24655 is a high- and low-side current shunt and power monitor with an I2C
101 programmable calibration value and conversion times. The SY24655 can also
104 The shunt value in micro-ohms can be set via platform data or device tree at
105 compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
110 Documentation/hwmon/sysfs-interface.rst. Internally the interval is the sum of
117 ---------------------
128 ------------------------------------------------------------------------
145 update_interval data conversion time; affects number of samples used
150 ------------------------------
158 - Configure `shunt_resistor` before configure `power1_crit`, because power
160 - Because of the underlying register implementation, only one `*crit` setting
161 and its `alarm` can be active. Writing to one `*crit` setting clears other