Lines Matching +full:0 +full:- +full:datasheet
12 Datasheet: Not public
20 Datasheet: Not public
28 Datasheet: Available from the Fintek website
36 Datasheet: Available from the Fintek website
44 Datasheet: Available from the Fintek website
52 Datasheet: Not public
60 Datasheet: Available from the Fintek website
68 Datasheet: Available from the Fintek website
76 Datasheet: Should become available on the Fintek website soon
84 Datasheet: Should become available on the Fintek website soon
92 Datasheet: Not public
100 Datasheet: Not public
103 This is the 64-pin variant of the F71889FG, they have the
113 Datasheet: Available from the Fintek website
119 -----------
133 ----------
136 interface as documented in sysfs-interface, without any exceptions.
140 -----------
142 Both PWM (pulse-width modulation) and DC fan speed control methods are
149 vica versa. So the temperature zone trip points 1-4 (or 1-2) go from high temp
154 voltage) mode, where 0-100% duty cycle (0-100% of 12V) is specified. And RPM
156 gets specified as 0-100% of the fan#_full_speed file.
158 Since both modes work in a 0-100% (mapped to 0-255) scale, there isn't a
160 important difference is that in RPM mode the 0-100% controls the fan speed
161 between 0-100% of fan#_full_speed. It is assumed that if the BIOS programs
166 Switching between these modes requires re-initializing a whole bunch of
184 The number and type of trip points are chip dependent - see the available