Lines Matching +full:fan +full:- +full:target +full:- +full:rpm
19 -----------
22 The chip has one on-chip and one remote temperature sensor and one pwm fan
29 temp1_input ro on-chip temperature
51 fan1_target rw Target fan speed, to be used with pwm1_enable
55 pwm1_enable rw regulator mode, 1=open loop, 2=fan controlled
56 by remote temperature, 3=fan controlled by
57 combination of the on-chip temperature and
58 remote-sensor temperature,
59 4=fan controlled by target rpm set with
61 pwm1_mode rw Fan duty control mode (0=DC, 1=PWM)
71 which is rw. Below this temperature fan stops.
72 temp1_auto_point2_temp rw The low-temperature limit of the proportional
78 temp1_auto_point3_temp rw Above this temperature fan runs at maximum
87 Below this temperature the fan stops in
89 temp2_auto_point2_temp rw The low-temperature limit of the proportional
95 temp2_auto_point3_temp rw Above this temperature fan runs at maximum
104 -----------------
112 - init=1,
113 - pwminv: 0 default pwm output, 1 inverts pwm output.