Lines Matching +full:technical +full:- +full:documentation

10     Addresses scanned: -
12     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
18     Addresses scanned: -
20     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
26     Addresses scanned: -
34     Addresses scanned: -
36     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
42     Addresses scanned: -
44     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
50     Addresses scanned: -
52     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
58     Addresses scanned: -
60     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adm1281.pdf
66     Addresses scanned: -
68     Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
70 Author: Guenter Roeck <linux@roeck-us.net>
74 -----------
77 ADM1273, ADM1275, ADM1276, ADM1278, ADM1281, ADM1293, and ADM1294 Hot-Swap
81 ADM1294 are hot-swap controllers that allow a circuit board to be removed from
83 readback via an integrated 12 bit analog-to-digital converter (ADC), accessed
87 Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
91 -----------
93 This driver does not auto-detect devices. You will have to instantiate the
94 devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for
101 The shunt value in micro-ohms can be set via device tree at compile-time. Please
102 refer to the Documentation/devicetree/bindings/hwmon/adi,adm1275.yaml for bindings
106 ---------------------
109 Documentation/hwmon/pmbus.rst for details.
113 -------------
115 The following attributes are supported. Limits are read-write, history reset
116 attributes are write-only, all other attributes are read-only.