Lines Matching +full:itu +full:- +full:t
1 .. SPDX-License-Identifier: GPL-2.0
18 - Set time
19 - Get time
20 - Shift the clock by a given offset atomically
21 - Adjust clock frequency
24 - Time stamp external events
25 - Period output signals configurable from user space
26 - Low Pass Filter (LPF) access from user space
27 - Synchronization of the Linux system time via the PPS subsystem
65 ancillary feature, then the driver should just return -EOPNOTSUPP
77 -----------------------------------------------
97 - 2 Time stamp external triggers, programmable polarity (opt. interrupt)
98 - 2 Alarm registers (optional interrupt)
99 - 3 Periodic signals (optional interrupt)
103 - 6 GPIOs programmable as inputs or outputs
104 - 6 GPIOs with dedicated functions (LED/JTAG/clock) can also be
106 - GPIO inputs can time stamp external triggers
107 - GPIO outputs can produce periodic signals
108 - 1 interrupt pin
112 - Auxiliary Slave/Master Mode Snapshot (optional interrupt)
113 - Target Time (optional interrupt)
117 - Up to 4 independent PHC channels
118 - Integrated low pass filter (LPF), access via .adjPhase (compliant to ITU-T G.8273.2)
119 - Programmable output periodic signals
120 - Programmable inputs can time stamp external triggers
121 - Driver and/or hardware configuration through firmware (idtcm.bin)
122 …- LPF settings (bandwidth, phase limiting, automatic holdover, physical layer assist (per ITU-T G.…
123 …- Programmable output PTP clocks, any frequency up to 1GHz (to other PHY/MAC time stampers, refclk…
124 … - Lock to GNSS input, automatic switching between GNSS and user-space PHC control (optional)
128 - GPIO
129 - Certain variants of ConnectX-6 Dx and later products support one
132 - Certain variants of ConnectX-5 and older products support one GPIO,
135 - PHC instances
136 - All ConnectX devices have a free-running counter
137 - ConnectX-6 Dx and later devices have a UTC format counter