Lines Matching +full:regulator +full:- +full:output
1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
4 $id: http://devicetree.org/schemas/regulator/vctrl-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Heiko Stuebner <[email protected]>
13 - $ref: regulator.yaml#
17 const: vctrl-regulator
19 ctrl-supply:
20 description: Regulator supplying the control voltage
22 ctrl-voltage-range:
26 generate the corresponding regulator-min/max-microvolt output
30 $ref: /schemas/types.yaml#/definitions/uint32-array
32 min-slew-down-rate:
34 Describes how slowly the regulator voltage will decay down in the
36 main regulator ramp rate). This value is required when
37 ovp-threshold-percent is specified.
40 ovp-threshold-percent:
42 Overvoltage protection (OVP) threshold of the regulator in percent.
43 Some regulators have an OVP circuitry which shuts down the regulator
44 when the actual output voltage deviates beyond a certain margin from
46 decreases this can occur undesiredly since the output voltage does
56 ovp-threshold-percent: [ min-slew-down-rate ]
59 - compatible
60 - ctrl-supply
61 - ctrl-voltage-range
62 - regulator-min-microvolt
63 - regulator-max-microvolt
66 - |
67 vctrl-reg {
68 compatible = "vctrl-regulator";
69 regulator-name = "vctrl_reg";
71 ctrl-supply = <&ctrl_reg>;
72 ctrl-voltage-range = <200000 500000>;
74 min-slew-down-rate = <225>;
75 ovp-threshold-percent = <16>;
77 regulator-min-microvolt = <800000>;
78 regulator-max-microvolt = <1500000>;