Lines Matching +full:qcom +full:- +full:msm8994 +full:- +full:tlmm +full:- +full:state
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/pinctrl/qcom,msm8994-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm MSM8994 TLMM pin controller
10 - Bjorn Andersson <[email protected]>
11 - Krzysztof Kozlowski <[email protected]>
14 Top Level Mode Multiplexer pin controller in Qualcomm MSM8994 SoC.
19 - qcom,msm8992-pinctrl
20 - qcom,msm8994-pinctrl
28 gpio-reserved-ranges:
32 gpio-line-names:
36 "-state$":
38 - $ref: "#/$defs/qcom-msm8994-tlmm-state"
39 - patternProperties:
40 "-pins$":
41 $ref: "#/$defs/qcom-msm8994-tlmm-state"
45 qcom-msm8994-tlmm-state:
50 $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
60 - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[0-5])$"
61 - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
101 - pins
104 - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
107 - compatible
108 - reg
113 - |
114 #include <dt-bindings/interrupt-controller/arm-gic.h>
116 tlmm: pinctrl@fd510000 {
117 compatible = "qcom,msm8994-pinctrl";
120 gpio-controller;
121 gpio-ranges = <&tlmm 0 0 146>;
122 #gpio-cells = <2>;
123 interrupt-controller;
124 #interrupt-cells = <2>;
126 blsp1-uart2-default-state {
129 drive-strength = <16>;
130 bias-disable;
133 blsp1-spi1-default-state {
134 default-pins {
137 drive-strength = <10>;
138 bias-pull-down;
141 cs-pins {
144 drive-strength = <2>;
145 bias-disable;