Lines Matching +full:output +full:- +full:vswing +full:- +full:microvolt
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/phy/st,stm32mp25-combophy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Christian Bruel <[email protected]>
18 const: st,stm32mp25-combophy
23 "#phy-cells":
29 - description: apb Bus clock mandatory to access registers.
30 - description: ker Internal RCC reference clock for USB3 or PCIe
31 - description: pad Optional on board clock input for PCIe only. Typically an
35 clock-names:
38 - const: apb
39 - const: ker
40 - const: pad
45 reset-names:
48 power-domains:
51 wakeup-source: true
57 access-controllers:
61 st,ssc-on:
66 st,rx-equalizer:
74 st,output-micro-ohms:
79 A value property to tune the Single Ended Output Impedance, simulations results
82 st,output-vswing-microvolt:
87 A value property in microvolt to tune the Single Ended Output Voltage Swing to change the
91 - compatible
92 - reg
93 - "#phy-cells"
94 - clocks
95 - clock-names
96 - resets
97 - reset-names
102 - |
103 #include <dt-bindings/clock/st,stm32mp25-rcc.h>
104 #include <dt-bindings/interrupt-controller/arm-gic.h>
105 #include <dt-bindings/reset/st,stm32mp25-rcc.h>
108 compatible = "st,stm32mp25-combophy";
110 #phy-cells = <1>;
112 clock-names = "apb", "ker";
114 reset-names = "phy";
115 access-controllers = <&rifsc 67>;
116 power-domains = <&CLUSTER_PD>;
117 wakeup-source;
118 interrupts-extended = <&exti1 45 IRQ_TYPE_EDGE_FALLING>;