Lines Matching +full:amplitude +full:- +full:control +full:- +full:coarse +full:- +full:tuning
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Stanley Chang <[email protected]>
23 XHCI controller#0 -- usb2phy -- phy#0
24 |- usb3phy -- phy#0
25 XHCI controller#1 -- usb2phy -- phy#0
26 XHCI controller#2 -- usb2phy -- phy#0
27 |- usb3phy -- phy#0
32 XHCI controller#0 -- usb2phy -- phy#0
33 XHCI controller#1 -- usb2phy -- phy#0
34 XHCI controller#2 -- usb2phy -- phy#0
35 |- usb3phy -- phy#0
40 XHCI controller#0 -- usb2phy -- phy#0
41 |- usb3phy -- phy#0
42 XHCI controller#1 -- usb2phy -- phy#0
43 XHCI controller#2 -- usb2phy -- phy#0
48 - realtek,rtd1295-usb3phy
49 - realtek,rtd1319-usb3phy
50 - realtek,rtd1319d-usb3phy
51 - realtek,rtd1619-usb3phy
52 - realtek,rtd1619b-usb3phy
57 "#phy-cells":
60 nvmem-cells:
65 nvmem-cell-names:
67 - const: usb_u3_tx_lfps_swing_trim
69 realtek,amplitude-control-coarse-tuning:
71 This adjusts the signal amplitude for normal operation and beacon LFPS.
72 This value is a parameter for coarse tuning.
80 realtek,amplitude-control-fine-tuning:
82 This adjusts the signal amplitude for normal operation and beacon LFPS.
83 This value is used for fine-tuning parameters.
90 - compatible
91 - reg
92 - "#phy-cells"
97 - |
98 usb-phy@13e10 {
99 compatible = "realtek,rtd1319d-usb3phy";
101 #phy-cells = <0>;
103 nvmem-cells = <&otp_usb_u3_tx_lfps_swing_trim>;
104 nvmem-cell-names = "usb_u3_tx_lfps_swing_trim";
106 realtek,amplitude-control-coarse-tuning = <0x77>;