Lines Matching +full:mapphone +full:- +full:cpcap +full:- +full:adc
1 Motorola CPCAP PMIC USB PHY binding
4 compatible: Shall be either "motorola,cpcap-usb-phy" or
5 "motorola,mapphone-cpcap-usb-phy"
6 #phy-cells: Shall be 0
7 interrupts: CPCAP PMIC interrupts used by the USB PHY
8 interrupt-names: Interrupt names
9 io-channels: IIO ADC channels used by the USB PHY
10 io-channel-names: IIO ADC channel names
11 vusb-supply: Regulator for the PHY
15 pinctrl-names: Names for optional pin modes
16 mode-gpios: Optional GPIOs for configuring alternate modes
20 compatible = "motorola,mapphone-cpcap-usb-phy";
21 pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
22 pinctrl-1 = <&usb_ulpi_pins>;
23 pinctrl-2 = <&usb_utmi_pins>;
24 pinctrl-3 = <&uart3_pins>;
25 pinctrl-names = "default", "ulpi", "utmi", "uart";
26 #phy-cells = <0>;
27 interrupts-extended = <
28 &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
29 &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
30 &cpcap 48 1
32 interrupt-names =
35 mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
37 io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
38 io-channel-names = "vbus", "id";
39 vusb-supply = <&vusb>;