Lines Matching +full:invert +full:- +full:interrupt

9 - compatible: Should be one of the following strings:
13 - reg: Specify the SPI chip select the chip is wired to.
14 - interrupts: Specify the interrupt index within the interrupt controller (referred
15               to above in interrupt-parent) and interrupt type. w5x00 natively
17               might invert the signal.
18 - pinctrl-names: List of assigned state names, see pinctrl binding documentation.
19 - pinctrl-0: List of phandles to configure the GPIO pin used as interrupt line,
24 - spi-max-frequency: Maximum frequency of the SPI bus when accessing the w5500.
27 - local-mac-address: See ethernet.txt in the same directory.
36 		pinctrl-names = "default";
37 		pinctrl-0 = <&eth1_pins>;
38 		interrupt-parent = <&gpio>;
40 		spi-max-frequency = <30000000>;