Lines Matching +full:timing +full:- +full:role
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Andrew Lunn <[email protected]>
11 - Florian Fainelli <[email protected]>
12 - Heiner Kallweit <[email protected]>
14 # The dt-schema tools will generate a select statement first by using
21 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
24 - $nodename
28 pattern: "^ethernet-phy(@[a-f0-9]+)?$"
32 - const: ethernet-phy-ieee802.3-c22
34 - const: ethernet-phy-ieee802.3-c45
36 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
46 - items:
47 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
48 - const: ethernet-phy-ieee802.3-c22
49 - items:
50 - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
51 - const: ethernet-phy-ieee802.3-c45
62 max-speed:
64 - 10
65 - 100
66 - 1000
67 - 2500
68 - 5000
69 - 10000
70 - 20000
71 - 25000
72 - 40000
73 - 50000
74 - 56000
75 - 100000
76 - 200000
80 phy-10base-t1l-2.4vpp:
89 broken-turn-around:
96 brr-mode:
100 defined in the BroadR-Reach link mode specification under 1BR-100 and
101 1BR-10 names. The PHY must be configured to operate in BroadR-Reach mode
110 enet-phy-lane-swap:
117 enet-phy-lane-no-swap:
125 eee-broken-100tx:
131 eee-broken-1000t:
137 eee-broken-10gt:
143 eee-broken-1000kx:
149 eee-broken-10gkx4:
155 eee-broken-10gkr:
161 timing-role:
164 - forced-master
165 - forced-slave
166 - preferred-master
167 - preferred-slave
169 Specifies the timing role of the PHY in the network link. This property is
170 required for setups where the role must be explicitly assigned via the
173 It is applicable to Single Pair Ethernet (1000/100/10Base-T1) and other
174 PHY types, including 1000Base-T, where it controls whether the PHY should
177 - 'forced-master': The PHY is forced to operate as a master.
178 - 'forced-slave': The PHY is forced to operate as a slave.
179 - 'preferred-master': Prefer the PHY to be master but allow negotiation.
180 - 'preferred-slave': Prefer the PHY to be slave but allow negotiation.
183 $ref: /schemas/types.yaml#/definitions/phandle-array
188 phy-is-integrated:
200 reset-names:
203 reset-gpios:
208 reset-assert-us:
213 reset-deassert-us:
223 rx-internal-delay-ps:
229 tx-internal-delay-ps:
239 '#address-cells':
242 '#size-cells':
246 '^led@[a-f0-9]+$':
258 - reg
265 - reg
270 - |
271 #include <dt-bindings/leds/common.h>
274 #address-cells = <1>;
275 #size-cells = <0>;
277 ethernet-phy@0 {
278 compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
279 interrupt-parent = <&PIC>;
284 reset-names = "phy";
285 reset-gpios = <&gpio1 4 1>;
286 reset-assert-us = <1000>;
287 reset-deassert-us = <2000>;
290 #address-cells = <1>;
291 #size-cells = <0>;
297 default-state = "keep";