Lines Matching +full:vddrfa2p2 +full:- +full:supply
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/net/bluetooth/qualcomm-bluetooth.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Balakrishna Godavarthi <[email protected]>
11 - Rocky Liao <[email protected]>
14 This binding describes Qualcomm UART-attached bluetooth chips.
19 - qcom,qca2066-bt
20 - qcom,qca6174-bt
21 - qcom,qca9377-bt
22 - qcom,wcn3988-bt
23 - qcom,wcn3990-bt
24 - qcom,wcn3991-bt
25 - qcom,wcn3998-bt
26 - qcom,qca6390-bt
27 - qcom,wcn6750-bt
28 - qcom,wcn6855-bt
29 - qcom,wcn7850-bt
31 enable-gpios:
35 swctrl-gpios:
38 of clock supply to SoC
44 vddio-supply:
45 description: VDD_IO supply regulator handle
47 vddxo-supply:
48 description: VDD_XO supply regulator handle
50 vddrf-supply:
51 description: VDD_RF supply regulator handle
53 vddch0-supply:
54 description: VDD_CH0 supply regulator handle
56 vddch1-supply:
57 description: VDD_CH1 supply regulator handle
59 vddaon-supply:
60 description: VDD_AON supply regulator handle
62 vdddig-supply:
63 description: VDD_DIG supply regulator handle
65 vddbtcmx-supply:
66 description: VDD_BT_CMX supply regulator handle
68 vddbtcxmx-supply:
69 description: VDD_BT_CXMX supply regulator handle
71 vddrfacmn-supply:
72 description: VDD_RFA_CMN supply regulator handle
74 vddrfa0p8-supply:
75 description: VDD_RFA_0P8 supply regulator handle
77 vddrfa1p7-supply:
78 description: VDD_RFA_1P7 supply regulator handle
80 vddrfa1p8-supply:
81 description: VDD_RFA_1P8 supply regulator handle
83 vddrfa1p2-supply:
84 description: VDD_RFA_1P2 supply regulator handle
86 vddrfa1p9-supply:
87 description: VDD_RFA_1P9 supply regulator handle
89 vddrfa2p2-supply:
90 description: VDD_RFA_2P2 supply regulator handle
92 vddasd-supply:
93 description: VDD_ASD supply regulator handle
95 vddwlcx-supply:
96 description: VDD_WLCX supply regulator handle
98 vddwlmx-supply:
99 description: VDD_WLMX supply regulator handle
101 max-speed: true
103 firmware-name:
106 - description: specify the name of nvm firmware to load
107 - description: specify the name of rampatch firmware to load
109 local-bd-address: true
111 qcom,local-bd-address-broken:
114 boot firmware is incorrectly passing the address in big-endian order
117 - compatible
122 - $ref: bluetooth-controller.yaml#
123 - $ref: /schemas/serial/serial-peripheral-props.yaml#
124 - if:
129 - qcom,qca2066-bt
130 - qcom,qca6174-bt
133 - enable-gpios
134 - clocks
136 - if:
141 - qcom,wcn3988-bt
142 - qcom,wcn3990-bt
143 - qcom,wcn3991-bt
144 - qcom,wcn3998-bt
147 - vddio-supply
148 - vddxo-supply
149 - vddrf-supply
150 - vddch0-supply
152 - if:
157 - qcom,wcn6750-bt
160 - vddaon-supply
161 - vddrfacmn-supply
162 - vddrfa0p8-supply
163 - vddrfa1p7-supply
164 - vddrfa1p2-supply
165 - if:
170 - qcom,wcn6855-bt
173 - vddrfacmn-supply
174 - vddaon-supply
175 - vddwlcx-supply
176 - vddwlmx-supply
177 - vddbtcmx-supply
178 - vddrfa0p8-supply
179 - vddrfa1p2-supply
180 - vddrfa1p8-supply
181 - if:
186 - qcom,wcn7850-bt
189 - vddrfacmn-supply
190 - vddaon-supply
191 - vddwlcx-supply
192 - vddwlmx-supply
193 - vddrfa0p8-supply
194 - vddrfa1p2-supply
195 - vddrfa1p8-supply
196 - if:
201 - qcom,qca6390-bt
204 - vddrfacmn-supply
205 - vddaon-supply
206 - vddbtcmx-supply
207 - vddrfa0p8-supply
208 - vddrfa1p2-supply
209 - vddrfa1p7-supply
212 - |
213 #include <dt-bindings/gpio/gpio.h>
217 compatible = "qcom,qca6174-bt";
218 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
220 firmware-name = "nvm_00440302.bin";
223 - |
227 compatible = "qcom,wcn3990-bt";
228 vddio-supply = <&vreg_s4a_1p8>;
229 vddxo-supply = <&vreg_l7a_1p8>;
230 vddrf-supply = <&vreg_l17a_1p3>;
231 vddch0-supply = <&vreg_l25a_3p3>;
232 max-speed = <3200000>;
233 firmware-name = "crnv21.bin";
236 - |
240 compatible = "qcom,wcn6750-bt";
241 pinctrl-names = "default";
242 pinctrl-0 = <&bt_en_default>;
243 enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
244 swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
245 vddio-supply = <&vreg_l19b_1p8>;
246 vddaon-supply = <&vreg_s7b_0p9>;
247 vddbtcxmx-supply = <&vreg_s7b_0p9>;
248 vddrfacmn-supply = <&vreg_s7b_0p9>;
249 vddrfa0p8-supply = <&vreg_s7b_0p9>;
250 vddrfa1p7-supply = <&vreg_s1b_1p8>;
251 vddrfa1p2-supply = <&vreg_s8b_1p2>;
252 vddrfa2p2-supply = <&vreg_s1c_2p2>;
253 vddasd-supply = <&vreg_l11c_2p8>;
254 max-speed = <3200000>;
255 firmware-name = "msnv11.bin";