Lines Matching +full:program +full:- +full:gpios
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Patrick Gansterer <[email protected]>
23 "#address-cells":
26 "#size-cells":
29 reset-gpios:
32 ti,brightness-rate-of-change-us:
36 ti,oled-mode:
49 The control register that is used to program the two current sinks.
53 configured to control both sinks with the led-sources property.
59 led-sources:
66 default-brightness:
71 max-brightness:
77 - reg
82 - compatible
83 - reg
88 - |
89 #include <dt-bindings/gpio/gpio.h>
91 #address-cells = <1>;
92 #size-cells = <0>;
97 reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
99 ti,oled-mode;
100 ti,brightness-rate-of-change-us = <52000>;
102 #address-cells = <1>;
103 #size-cells = <0>;
107 led-sources = <0 1>;
108 label = "lcd-backlight";
109 default-brightness = <12>;
110 max-brightness = <31>;
114 - |
116 #address-cells = <1>;
117 #size-cells = <0>;
123 #address-cells = <1>;
124 #size-cells = <0>;
128 default-brightness = <12>;
133 default-brightness = <15>;