Lines Matching +full:external +full:- +full:irqs
1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/interrupt-controller/st,stih407-irq-syscfg.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: STMicroelectronics STi System Configuration Controlled IRQs
10 - Patrice Chotard <[email protected]>
13 On STi based systems; External, CTI (Core Sight), PMU (Performance
14 Management), and PL310 L2 Cache IRQs are controlled using System
19 const: st,stih407-irq-syscfg
22 description: Phandle to Cortex-A9 IRQ system config registers
25 st,irq-device:
26 description: Array of IRQs to enable.
27 $ref: /schemas/types.yaml#/definitions/uint32-array
29 - description: Enable the IRQ of the channel one.
30 - description: Enable the IRQ of the channel two.
32 st,fiq-device:
34 $ref: /schemas/types.yaml#/definitions/uint32-array
36 - description: Enable the IRQ of the channel one.
37 - description: Enable the IRQ of the channel two.
39 st,invert-ext:
40 description: External IRQs can be inverted at will. This property inverts
41 these three IRQs using bitwise logic, each one being encoded respectively
47 - compatible
48 - st,syscfg
49 - st,irq-device
50 - st,fiq-device
55 - |
56 #include <dt-bindings/interrupt-controller/irq-st.h>
57 irq-syscfg {
58 compatible = "st,stih407-irq-syscfg";
60 st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
62 st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,