Lines Matching +full:adt7490 +full:- +full:d
1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jean Delvare <[email protected]>
13 The ADT7473, ADT7475, ADT7476, and ADT7490 are thermal monitors and multiple
16 They support monitoring and controlling up to four fans (the ADT7490 can only
18 sensor and two off chip temperature sensors (the ADT7490 additionally
23 https://www.onsemi.com/pub/Collateral/ADT7473-D.PDF
24 https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF
25 https://www.onsemi.com/pub/Collateral/ADT7476-D.PDF
26 https://www.onsemi.com/pub/Collateral/ADT7490-D.PDF
34 - adi,adt7473
35 - adi,adt7475
36 - adi,adt7476
37 - adi,adt7490
42 adi,pwm-active-state:
47 $ref: /schemas/types.yaml#/definitions/uint32-array
55 "#pwm-cells":
59 - 0: The PWM channel
60 - 1: The PWM period in nanoseconds
61 - 90909091 (11 Hz)
62 - 71428571 (14 Hz)
63 - 45454545 (22 Hz)
64 - 34482759 (29 Hz)
65 - 28571429 (35 Hz)
66 - 22727273 (44 Hz)
67 - 17241379 (58 Hz)
68 - 11363636 (88 Hz)
69 - 44444 (22 kHz)
70 - 2: PWM flags 0 or PWM_POLARITY_INVERTED
71 - 3: The default PWM duty cycle in nanoseconds
74 "^adi,bypass-attenuator-in[0-4]$":
83 "^adi,pin(5|10)-function$":
86 pin 10 on the adi,adt7476 and adi,adt7490.
89 - pwm2
90 - smbalert#
92 "^adi,pin(9|14)-function$":
95 pin 14 on the adi,adt7476 and adi,adt7490
98 - tach4
99 - therm#
100 - smbalert#
101 - gpio
103 "^fan-[0-9]+$":
104 $ref: fan-common.yaml#
108 - compatible
109 - reg
114 - |
115 #include <dt-bindings/pwm/pwm.h>
117 #address-cells = <1>;
118 #size-cells = <0>;
123 adi,bypass-attenuator-in0 = <1>;
124 adi,bypass-attenuator-in1 = <0>;
125 adi,pin10-function = "smbalert#";
126 adi,pin14-function = "tach4";
127 #pwm-cells = <4>;
130 fan-0 {
134 fan-1 {