Lines Matching +full:data +full:- +full:independent

5 The HiSilicon SoC chip includes various independent system device PMUs
7 independent and have hardware logic to gather statistics and performance
13 two HHAs (0 - 1) and four DDRCs (0 - 3), respectively.
16 -------------------------------
27 name will appear in event listing as hisi_sccl<sccl-id>_module<index-id>.
28 where "sccl-id" is the identifier of the SCCL and "index-id" is the index of
47   ------------------------------------------
49   ------------------------------------------
51   ------------------------------------------
53   ------------------------------------------
55   $# perf stat -a -e hisi_sccl3_l3c0/rd_hit_cpipe/ sleep 5
56   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02/ sleep 5
64   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_core=0x3/ sleep 5
72 3'b111 represents atomic non-store operations, other values are reserved::
74   $# perf stat -a -e hisi_sccl3_l3c0/config=0x02,tt_req=0x4/ sleep 5
78 3. Datasrc allows the user to check where the data comes from. It is 5 bits.
81 - 5'b00001: comes from L3C in this die;
82 - 5'b01000: comes from L3C in the cross-die;
83 - 5'b01001: comes from L3C which is in another socket;
84 - 5'b01110: comes from the local DDR;
85 - 5'b01111: comes from the cross-die DDR;
86 - 5'b10000: comes from cross-socket DDR;
88 etc, it is mainly helpful to find that the data source is nearest from the CPU
89 cores. If datasrc_cfg is used in the multi-chips, the datasrc_skt shall be
92   $# perf stat -a -e hisi_sccl3_l3c0/config=0xb9,datasrc_cfg=0xE/,
98 SoC has a unique ID. Each ID is 11bits, include a 6-bit SCCL-ID and 5-bit
99 CCL/ICL-ID. For I/O die, the ICL-ID is followed by:
101 - 5'b00000: I/O_MGMT_ICL;
102 - 5'b00001: Network_ICL;
103 - 5'b00011: HAC_ICL;
104 - 5'b10000: PCIe_ICL;
109 - 2'b11: count the events which sent to the uring_ext (MATA) channel;
110 - 2'b01: is the same as 2'b11;
111 - 2'b10: count the events which sent to the uring (non-MATA) channel;
112 - 2'b00: default value, count the events which sent to the both uring and
115 Users could configure IDs to count data come from specific CCL/ICL, by setting
116 srcid_cmd & srcid_msk, and data desitined for specific CCL/ICL by setting