Lines Matching +full:60 +full:mhz

334 framerate of 59.94 Hz is really different from 60 Hz. If the framerate
344 supports frames per second settings of 10, 15, 25, 30, 50 and 60 fps. Which ones
368 is the newest in time. For 60 Hz standards that is reversed: the bottom field
372 contain the top field for 50 Hz standards and the bottom field for 60 Hz
387 The TV 'tuner' supports a frequency range of 44-958 MHz. Channels are available
388 every 6 MHz, starting from 49.25 MHz. For each channel the generated image
389 will be in color for the +/- 0.25 MHz around it, and in grayscale for
390 +/- 1 MHz around the channel. Beyond that it is just noise. The VIDIOC_G_TUNER
391 ioctl will return 100% signal strength for +/- 0.25 MHz and 50% for +/- 1 MHz.
395 The audio subchannels that are returned are MONO for the +/- 1 MHz range around
396 a valid channel frequency. When the frequency is within +/- 0.25 MHz of the
412 interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
470 interlaced, for pixelclock frequencies between 25 and 600 MHz. The field
494 cases the driver will generate valid VBI data: for 60 Hz standards it will
513 for 50 Hz standards and Closed Captioning + XDS for 60 Hz standards.
525 	- FM: 64 MHz - 108 MHz
527 	- SW: 2300 kHz - 26.1 MHz
529 Valid channels are emulated every 1 MHz for FM and every 100 kHz for AM and SW.
533 95 MHz.
561 	- FM: 64 MHz - 108 MHz
563 	- SW: 2300 kHz - 26.1 MHz
565 The initial frequency when the driver is loaded is 95.5 MHz.
582 The RF tuner supports 50 MHz - 2000 MHz.
1167   So it is not possible to loop a 50 Hz (720x576) S-Video output to a 60 Hz
1201 for either raw or sliced VBI. Note that at the moment only CC/XDS (60 Hz formats)