Lines Matching +full:0 +full:x1401
153 (output in hex format: 0xAAAABBCC), where:
211 events. If a key is "masked" (bit set to 0 in the mask), the firmware
240 echo 0xffffffff > /proc/acpi/ibm/hotkey -- enable all hot keys
241 echo 0 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
262 Returns 0.
269 to this value. This is always 0x80c, because those are
276 0: returns -EPERM
323 0 and 25 Hz. Polling is only carried out when strictly
337 attribute will read 0 if the switch is in the "radios
345 will read 0 if the ThinkPad is in normal mode, and
364 user's choice. Refer to HKEY events 0x4003 and
365 0x3003, below.
385 vendor 0x1014 (PCI_VENDOR_ID_IBM) or
386 0x17aa (PCI_VENDOR_ID_LENOVO)
387 product 0x5054 ("TP")
388 version 0x4101
392 backwards-compatible way. The MSB shall always be 0x41 for this input
393 device. If the MSB is not 0x41, do not use the device as described in
401 Thinkpad-acpi Hot Key event map (version 0x4101):
407 0x1001 0x00 FN+F1 -
409 0x1002 0x01 FN+F2 IBM: battery (rare)
412 0x1003 0x02 FN+F3 Many IBM models always report
420 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button
431 0x1005 0x04 FN+F5 Radio. Enables/disables
440 0x1006 0x05 FN+F6 -
442 0x1007 0x06 FN+F7 Video output cycle.
445 0x1008 0x07 FN+F8 IBM: toggle screen expand
449 0x131f (see below) and on newer
451 replaced by 0x1401 (see below).
453 0x1009 0x08 FN+F9 -
457 0x100B 0x0A FN+F11 -
459 0x100C 0x0B FN+F12 Sleep to disk. You are always
469 0x100D 0x0C FN+BACKSPACE -
470 0x100E 0x0D FN+INSERT -
471 0x100F 0x0E FN+DELETE -
473 0x1010 0x0F FN+HOME Brightness up. This key is
482 0x1011 0x10 FN+END Brightness down. See brightness
485 0x1012 0x11 FN+PGUP ThinkLight toggle. This key is
489 0x1013 0x12 FN+PGDOWN -
491 0x1014 0x13 FN+SPACE Zoom key
493 0x1015 0x14 VOLUME UP Internal mixer volume up. This
498 0x1016 0x15 VOLUME DOWN Internal mixer volume up. This
503 0x1017 0x16 MUTE Mute internal mixer. This
507 0x1018 0x17 THINKPAD ThinkPad/Access IBM/Lenovo key
509 0x1019 0x18 unknown
511 0x131f ... FN+F8 Platform Mode change (2024 systems).
514 0x1401 ... FN+F8 Platform Mode change (2025 + systems).
518 0x1020 0x1F unknown
539 SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
548 0x2304 System is waking up from suspend to undock
549 0x2305 System is waking up from suspend to eject bay
550 0x2404 System is waking up from hibernation to undock
551 0x2405 System is waking up from hibernation to eject bay
552 0x5001 Lid closed
553 0x5002 Lid opened
554 0x5009 Tablet swivel: switched to tablet mode
555 0x500A Tablet swivel: switched to normal mode
556 0x5010 Brightness level changed/control event
557 0x6000 KEYBOARD: Numlock key pressed
558 0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED)
559 0x7000 Radio Switch may have changed state
566 0x2313 ALARM: System is waking up from suspend because
568 0x2413 ALARM: System is waking up from hibernation because
570 0x3003 Bay ejection (see 0x2x05) complete, can sleep again
571 0x3006 Bay hotplug request (hint to power up SATA link when
573 0x4003 Undocked (see 0x2x04), can sleep again
574 0x4010 Docked into hotplug port replicator (non-ACPI dock)
575 0x4011 Undocked from hotplug port replicator (non-ACPI dock)
576 0x500B Tablet pen inserted into its storage bay
577 0x500C Tablet pen removed from its storage bay
578 0x6011 ALARM: battery is too hot
579 0x6012 ALARM: battery is extremely hot
580 0x6021 ALARM: a sensor is too hot
581 0x6022 ALARM: a sensor is extremely hot
582 0x6030 System thermal table changed
583 0x6032 Thermal Control command set completion (DYTC, Windows)
584 0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED)
585 0x60C0 X1 Yoga 2016, Tablet mode status changed
586 0x60F0 Thermal Transformation changed (GMTS, Windows)
590 operating system to hibernate or shutdown cleanly (0x2313), or shutdown
591 cleanly (0x2413) before power is lost. They must be acted upon, as the
652 - 0: disables Bluetooth / Bluetooth is disabled
755 real, but commands 0 to 2 don't control the mixer anymore (they have been
758 The range of valid cmos command numbers is 0 to 21, but not all have an
762 - 0 - Related to "Volume down" key press
812 The <LED number> range is 0 to 15. The set of LEDs that can be
816 - 0 - power
838 The LEDs are named (in LED ID order, from 0 to 12):
876 The valid <number> range is 0 to 17. Not all numbers trigger sounds
880 - 0 - stop a sound in progress (but use 17 to stop 16)
890 - 15 - three high-pitched beeps repeating constantly, stop with 0
1022 has eight brightness levels, ranging from 0 to 7. Some of the levels
1025 from 0 to 15.
1052 brightness_enable=0 forces it to be disabled. brightness_enable=1
1089 power management mode, where 0 is "display on", and 1 to 3
1090 will dim the display backlight to brightness level 0
1182 The <level> number range is 0 to 14 although not all of them may be
1235 Most ThinkPad fans work in "levels" at the firmware interface. Level 0
1296 Placing a fan on level 0 is the same as disabling it. Enabling a fan
1303 Where <level> is an integer from 0 to 7, or one of the words "auto" or
1325 If you want to disable the watchdog, use 0 as the interval.
1342 - 0: PWM offline (fan is set to full-speed mode)
1347 Modes 0 and 2 are not supported by all ThinkPads, and the
1352 Fan level, scaled from the firmware values of 0-7 to the hwmon
1353 scale of 0-255. 0 means fan stopped, 255 means highest normal
1368 not installed, will always read 0.
1372 1 second, maximum is 120 seconds. 0 disables the watchdog.
1415 - 0: disables WWAN card / WWAN card is disabled
1441 echo '0' >/proc/acpi/ibm/lcdshadow
1552 - 0 = Home mode
1571 accepts an integer between 0 and 99 (inclusive); this value represents a battery
1585 echo enable,0xffff > /proc/acpi/ibm/hotkey
1591 modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
1600 modprobe thinkpad_acpi debug=0xffff
1608 0x8000 Disclose PID of userspace programs
1610 0x0001 Initialization and probing
1611 0x0002 Removal
1612 0x0004 RF Transmitter control (RFKILL)
1614 0x0008 HKEY event interface, hotkeys
1615 0x0010 Fan control
1616 0x0020 Backlight brightness
1617 0x0040 Audio mixer/volume control
1640 0x000100: Initial sysfs support, as a single platform driver and
1642 0x000200: Hot key support for 32 hot keys, and radio slider switch
1644 0x010000: Hot keys are now handled by default over the input
1649 0x020000: ABI fix: added a separate hwmon platform device and
1655 0x020100: Marker for thinkpad-acpi with hot key NVRAM polling
1660 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling
1666 0x020200: Add poll()/select() support to the following attributes:
1669 0x020300: hotkey enable/disable support removed, attributes
1673 0x020400: Marker for 16 LEDs support. Also, LEDs that are known
1677 0x020500: Updated hotkey driver, hotkey_mask is always available
1682 0x020600: Marker for backlight change event support.
1684 0x020700: Support for mute-only mixers.
1688 0x030000: Thermal and fan sysfs attributes were moved to the hwmon