Lines Matching +full:ide +full:- +full:port
1 0 Unnamed devices (e.g. non-device mounts)
7 2 = /dev/kmem OBSOLETE - replaced by /proc/kcore
9 4 = /dev/port I/O port access
11 6 = /dev/core OBSOLETE - replaced by /proc/kcore
18 12 = /dev/oldmem OBSOLETE - replaced by /proc/vmcore
31 2 char Pseudo-TTY masters
37 Pseudo-tty's are named as follows:
40 the 1st through 16th series of 16 pseudo-ttys each, and
44 These are the old-style (BSD) PTY devices; Unix98
106 3 char Pseudo-TTY slaves
112 These are the old-style (BSD) PTY devices; Unix98
115 3 block First MFM, RLL and IDE hard disk/CD-ROM interface
116 0 = /dev/hda Master: whole disk (or CD-ROM)
117 64 = /dev/hdb Slave: whole disk (or CD-ROM)
126 For Linux/i386, partitions 1-4 are the primary
137 64 = /dev/ttyS0 First UART serial port
139 255 = /dev/ttyS191 192nd UART serial port
149 because the root filesystem is mounted read-only.
200 8 block SCSI disk devices (0-15)
207 Partitions are handled in the same way as for IDE
250 10 char Non-serial mice, misc features
252 1 = /dev/psaux PS/2-style mouse port
255 4 = /dev/jbm J-mouse
261 9 = /dev/pc110pad IBM PC-110 digitizer pad
269 130 = /dev/watchdog Watchdog timer port
278 141 = /dev/relay16 Berkshire Products ISO-16 relay card
281 144 = /dev/nvram Non-volatile configuration RAM
298 161 = /dev/userdma User-space DMA access
316 179 = /dev/xsvc High-speed shared-mem/semaphore service
319 182 = /dev/perfctr Performance-monitoring counters
325 189 = /dev/ussp_ctl User space serial port control
329 193 = /dev/d7s SPARC 7-segment display
330 194 = /dev/zkshim Zero-Knowledge network shim control
331 195 = /dev/elographics/e2201 Elographics touchscreen E271-2201
333 197 = /dev/pxa3xx-gcu PXA3xx graphics controller unit driver
337 201 = /dev/button/gulpb Transmeta GULP-B buttons
339 203 = /dev/cuse Cuse (character device in user-space)
354 218 = /dev/kchuid Inter-process chuid control
365 229 = /dev/fuse Fuse (virtual filesystem in user-space)
368 232 = /dev/kvm Kernel-based virtual machine (hardware virtualization extensions)
369 233 = /dev/kmview View-OS A process with a view
370 234 = /dev/btrfs-control Btrfs control device
372 236 = /dev/mapper/control Device-Mapper control device
373 237 = /dev/loop-control Loopback control device
374 238 = /dev/vhost-net Host kernel accelerator for virtio net
375 239 = /dev/uhid User-space I/O driver support for HID subsystem
377 241 = /dev/vhost-vsock Host kernel driver for virtio vsock
380 243-254 Reserved for local use
386 11 char Serial Mux device (Linux/PA-RISC only)
387 0 = /dev/ttyB0 First mux port
388 1 = /dev/ttyB1 Second mux port
391 11 block SCSI CD-ROM devices
392 0 = /dev/scd0 First SCSI CD-ROM
393 1 = /dev/scd1 Second SCSI CD-ROM
398 12 char QIC-02 tape
399 2 = /dev/ntpqic11 QIC-11, no rewind-on-close
400 3 = /dev/tpqic11 QIC-11, rewind-on-close
401 4 = /dev/ntpqic24 QIC-24, no rewind-on-close
402 5 = /dev/tpqic24 QIC-24, rewind-on-close
403 6 = /dev/ntpqic120 QIC-120, no rewind-on-close
404 7 = /dev/tpqic120 QIC-120, rewind-on-close
405 8 = /dev/ntpqic150 QIC-150, no rewind-on-close
406 9 = /dev/tpqic150 QIC-150, rewind-on-close
408 The device names specified are proposed -- if there
433 2 = /dev/midi00 First MIDI port
435 4 = /dev/audio Sun-compatible digital audio
438 8 = /dev/sequencer2 Sequencer -- alternate device
441 18 = /dev/midi01 Second MIDI port
445 34 = /dev/midi02 Third MIDI port
446 50 = /dev/midi03 Fourth MIDI port
457 15 block Sony CDU-31A/CDU-33A CD-ROM
458 0 = /dev/sonycd Sony CDU-31a CD-ROM
460 16 char Non-SCSI scanners
463 16 block GoldStar CD-ROM
464 0 = /dev/gscd GoldStar CD-ROM
467 0 = /dev/ttyH0 First Chase port
468 1 = /dev/ttyH1 Second Chase port
470 17 block Optics Storage CD-ROM
471 0 = /dev/optcd Optics Storage CD-ROM
473 18 char OBSOLETE (was Chase serial card - alternate devices)
477 18 block Sanyo CD-ROM
478 0 = /dev/sjcd Sanyo CD-ROM
491 20 block Hitachi CD-ROM (under development)
492 0 = /dev/hitcd Hitachi CD-ROM
502 device-naming practice.
508 This device is used on the ARM-based Acorn RiscPC.
509 Partitions are handled the same way as for IDE disks
513 0 = /dev/ttyD0 First Digiboard port
514 1 = /dev/ttyD1 Second Digiboard port
516 22 block Second IDE hard disk/CD-ROM interface
517 0 = /dev/hdc Master: whole disk (or CD-ROM)
518 64 = /dev/hdd Slave: whole disk (or CD-ROM)
523 23 char Digiboard serial card - alternate devices
527 23 block Mitsumi proprietary CD-ROM
528 0 = /dev/mcd Mitsumi CD-ROM
531 0 = /dev/ttyE0 Stallion port 0 card 0
532 1 = /dev/ttyE1 Stallion port 1 card 0
534 64 = /dev/ttyE64 Stallion port 0 card 1
535 65 = /dev/ttyE65 Stallion port 1 card 1
537 128 = /dev/ttyE128 Stallion port 0 card 2
538 129 = /dev/ttyE129 Stallion port 1 card 2
540 192 = /dev/ttyE192 Stallion port 0 card 3
541 193 = /dev/ttyE193 Stallion port 1 card 3
543 24 block Sony CDU-535 CD-ROM
544 0 = /dev/cdu535 Sony CDU-535 CD-ROM
546 25 char Stallion serial card - alternate devices
559 25 block First Matsushita (Panasonic/SoundBlaster) CD-ROM
560 0 = /dev/sbpcd0 Panasonic CD-ROM controller 0 unit 0
561 1 = /dev/sbpcd1 Panasonic CD-ROM controller 0 unit 1
562 2 = /dev/sbpcd2 Panasonic CD-ROM controller 0 unit 2
563 3 = /dev/sbpcd3 Panasonic CD-ROM controller 0 unit 3
567 26 block Second Matsushita (Panasonic/SoundBlaster) CD-ROM
568 0 = /dev/sbpcd4 Panasonic CD-ROM controller 1 unit 0
569 1 = /dev/sbpcd5 Panasonic CD-ROM controller 1 unit 1
570 2 = /dev/sbpcd6 Panasonic CD-ROM controller 1 unit 2
571 3 = /dev/sbpcd7 Panasonic CD-ROM controller 1 unit 3
573 27 char QIC-117 tape
574 0 = /dev/qft0 Unit 0, rewind-on-close
575 1 = /dev/qft1 Unit 1, rewind-on-close
576 2 = /dev/qft2 Unit 2, rewind-on-close
577 3 = /dev/qft3 Unit 3, rewind-on-close
578 4 = /dev/nqft0 Unit 0, no rewind-on-close
579 5 = /dev/nqft1 Unit 1, no rewind-on-close
580 6 = /dev/nqft2 Unit 2, no rewind-on-close
581 7 = /dev/nqft3 Unit 3, no rewind-on-close
582 16 = /dev/zqft0 Unit 0, rewind-on-close, compression
583 17 = /dev/zqft1 Unit 1, rewind-on-close, compression
584 18 = /dev/zqft2 Unit 2, rewind-on-close, compression
585 19 = /dev/zqft3 Unit 3, rewind-on-close, compression
586 20 = /dev/nzqft0 Unit 0, no rewind-on-close, compression
587 21 = /dev/nzqft1 Unit 1, no rewind-on-close, compression
588 22 = /dev/nzqft2 Unit 2, no rewind-on-close, compression
589 23 = /dev/nzqft3 Unit 3, no rewind-on-close, compression
590 32 = /dev/rawqft0 Unit 0, rewind-on-close, no file marks
591 33 = /dev/rawqft1 Unit 1, rewind-on-close, no file marks
592 34 = /dev/rawqft2 Unit 2, rewind-on-close, no file marks
593 35 = /dev/rawqft3 Unit 3, rewind-on-close, no file marks
594 36 = /dev/nrawqft0 Unit 0, no rewind-on-close, no file marks
595 37 = /dev/nrawqft1 Unit 1, no rewind-on-close, no file marks
596 38 = /dev/nrawqft2 Unit 2, no rewind-on-close, no file marks
597 39 = /dev/nrawqft3 Unit 3, no rewind-on-close, no file marks
599 27 block Third Matsushita (Panasonic/SoundBlaster) CD-ROM
600 0 = /dev/sbpcd8 Panasonic CD-ROM controller 2 unit 0
601 1 = /dev/sbpcd9 Panasonic CD-ROM controller 2 unit 1
602 2 = /dev/sbpcd10 Panasonic CD-ROM controller 2 unit 2
603 3 = /dev/sbpcd11 Panasonic CD-ROM controller 2 unit 3
605 28 char Stallion serial card - card programming
615 28 block Fourth Matsushita (Panasonic/SoundBlaster) CD-ROM
616 0 = /dev/sbpcd12 Panasonic CD-ROM controller 3 unit 0
617 1 = /dev/sbpcd13 Panasonic CD-ROM controller 3 unit 1
618 2 = /dev/sbpcd14 Panasonic CD-ROM controller 3 unit 2
619 3 = /dev/sbpcd15 Panasonic CD-ROM controller 3 unit 3
628 Partitions are handled in the same way as for IDE
638 29 block Aztech/Orchid/Okano/Wearnes CD-ROM
639 0 = /dev/aztcd Aztech CD-ROM
641 30 char iBCS-2 compatibility devices
655 Additionally, iBCS-2 requires the following links:
657 /dev/ip -> /dev/inet/ip
658 /dev/icmp -> /dev/inet/icmp
659 /dev/ggp -> /dev/inet/ggp
660 /dev/ipip -> /dev/inet/ipip
661 /dev/tcp -> /dev/inet/tcp
662 /dev/egp -> /dev/inet/egp
663 /dev/pup -> /dev/inet/pup
664 /dev/udp -> /dev/inet/udp
665 /dev/idp -> /dev/inet/idp
666 /dev/rawip -> /dev/inet/rawip
667 /dev/inet/arp -> /dev/inet/udp
668 /dev/inet/rip -> /dev/inet/udp
669 /dev/nfsd -> /dev/socksys
670 /dev/X0R -> /dev/null (? apparently not required ?)
672 30 block Philips LMS CM-205 CD-ROM
673 0 = /dev/cm205cd Philips LMS CM-205 CD-ROM
676 driver does not work with the CM-205MS CD-ROM.
678 31 char MPU-401 MIDI
679 0 = /dev/mpu401data MPU-401 data port
680 1 = /dev/mpu401stat MPU-401 status port
696 The read-write (rw) devices support back-caching
698 devices. The read-only devices (ro) support reading
702 0 = /dev/ttyX0 First Specialix port
703 1 = /dev/ttyX1 Second Specialix port
705 32 block Philips LMS CM-206 CD-ROM
706 0 = /dev/cm206cd Philips LMS CM-206 CD-ROM
708 33 char Specialix serial card - alternate devices
712 33 block Third IDE hard disk/CD-ROM interface
713 0 = /dev/hde Master: whole disk (or CD-ROM)
714 64 = /dev/hdf Slave: whole disk (or CD-ROM)
720 0 = /dev/scc0 First Z8530, first port
721 1 = /dev/scc1 First Z8530, second port
722 2 = /dev/scc2 Second Z8530, first port
723 3 = /dev/scc3 Second Z8530, second port
730 34 block Fourth IDE hard disk/CD-ROM interface
731 0 = /dev/hdg Master: whole disk (or CD-ROM)
732 64 = /dev/hdh Slave: whole disk (or CD-ROM)
738 0 = /dev/midi0 First MIDI port, kernel timed
739 1 = /dev/midi1 Second MIDI port, kernel timed
740 2 = /dev/midi2 Third MIDI port, kernel timed
741 3 = /dev/midi3 Fourth MIDI port, kernel timed
742 64 = /dev/rmidi0 First MIDI port, untimed
743 65 = /dev/rmidi1 Second MIDI port, untimed
744 66 = /dev/rmidi2 Third MIDI port, untimed
745 67 = /dev/rmidi3 Fourth MIDI port, untimed
746 128 = /dev/smpte0 First MIDI port, SMPTE timed
747 129 = /dev/smpte1 Second MIDI port, SMPTE timed
748 130 = /dev/smpte2 Third MIDI port, SMPTE timed
749 131 = /dev/smpte3 Fourth MIDI port, SMPTE timed
764 37 char IDE tape
765 0 = /dev/ht0 First IDE tape
766 1 = /dev/ht1 Second IDE tape
768 128 = /dev/nht0 First IDE tape, no rewind-on-close
769 129 = /dev/nht1 Second IDE tape, no rewind-on-close
772 Currently, only one IDE tape drive is supported.
788 39 char ML-16P experimental I/O board
789 0 = /dev/ml16pa-a0 First card, first analog channel
790 1 = /dev/ml16pa-a1 First card, second analog channel
792 15 = /dev/ml16pa-a15 First card, 16th analog channel
793 16 = /dev/ml16pa-d First card, digital lines
794 17 = /dev/ml16pa-c0 First card, first counter/timer
795 18 = /dev/ml16pa-c1 First card, second counter/timer
796 19 = /dev/ml16pa-c2 First card, third counter/timer
797 32 = /dev/ml16pb-a0 Second card, first analog channel
798 33 = /dev/ml16pb-a1 Second card, second analog channel
800 47 = /dev/ml16pb-a15 Second card, 16th analog channel
801 48 = /dev/ml16pb-d Second card, digital lines
802 49 = /dev/ml16pb-c0 Second card, first counter/timer
803 50 = /dev/ml16pb-c1 Second card, second counter/timer
804 51 = /dev/ml16pb-c2 Second card, third counter/timer
849 44 char isdn4linux virtual modem - alternate devices
861 Partitions are handled in the same way as for IDE
879 45 block Parallel port IDE disk devices
880 0 = /dev/pda First parallel port IDE disk
881 16 = /dev/pdb Second parallel port IDE disk
882 32 = /dev/pdc Third parallel port IDE disk
883 48 = /dev/pdd Fourth parallel port IDE disk
885 Partitions are handled in the same way as for IDE
890 0 = /dev/ttyR0 First Rocketport port
891 1 = /dev/ttyR1 Second Rocketport port
893 46 block Parallel port ATAPI CD-ROM devices
894 0 = /dev/pcd0 First parallel port ATAPI CD-ROM
895 1 = /dev/pcd1 Second parallel port ATAPI CD-ROM
896 2 = /dev/pcd2 Third parallel port ATAPI CD-ROM
897 3 = /dev/pcd3 Fourth parallel port ATAPI CD-ROM
899 47 char Comtrol Rocketport serial card - alternate devices
903 47 block Parallel port ATAPI disk devices
904 0 = /dev/pf0 First parallel port ATAPI disk
905 1 = /dev/pf1 Second parallel port ATAPI disk
906 2 = /dev/pf2 Third parallel port ATAPI disk
907 3 = /dev/pf3 Fourth parallel port ATAPI disk
913 0 = /dev/ttyL0 First RISCom port
914 1 = /dev/ttyL1 Second RISCom port
928 49 char SDL RISCom serial card - alternate devices
948 51 char Baycom radio modem OR Radio Tech BIM-XXX-RS232 radio modem
984 Parallel Port interface. PD is the Motorola Public
997 0 = /dev/holter0 First Holter port
998 1 = /dev/holter1 Second Holter port
999 2 = /dev/holter2 Third Holter port
1003 24-hour heart monitoring equipment.
1030 56 block Fifth IDE hard disk/CD-ROM interface
1031 0 = /dev/hdi Master: whole disk (or CD-ROM)
1032 64 = /dev/hdj Slave: whole disk (or CD-ROM)
1038 0 = /dev/ttyP0 First ESP port
1039 1 = /dev/ttyP1 Second ESP port
1042 57 block Sixth IDE hard disk/CD-ROM interface
1043 0 = /dev/hdk Master: whole disk (or CD-ROM)
1044 64 = /dev/hdl Slave: whole disk (or CD-ROM)
1049 58 char Hayes ESP serial card - alternate devices
1070 NAMING CONFLICT -- PROPOSED REVISED NAME /dev/rpda0 etc
1072 60-63 char LOCAL/EXPERIMENTAL USE
1074 60-63 block LOCAL/EXPERIMENTAL USE
1118 65 block SCSI disk devices (16-31)
1125 Partitions are handled in the same way as for IDE
1134 66 block SCSI disk devices (32-47)
1141 Partitions are handled in the same way as for IDE
1150 67 block SCSI disk devices (48-63)
1157 Partitions are handled in the same way as for IDE
1171 68 block SCSI disk devices (64-79)
1178 Partitions are handled in the same way as for IDE
1185 69 block SCSI disk devices (80-95)
1192 Partitions are handled in the same way as for IDE
1205 70 block SCSI disk devices (96-111)
1212 Partitions are handled in the same way as for IDE
1217 0 = /dev/ttyF0 IntelliPort II board 0, port 0
1218 1 = /dev/ttyF1 IntelliPort II board 0, port 1
1220 63 = /dev/ttyF63 IntelliPort II board 0, port 63
1221 64 = /dev/ttyF64 IntelliPort II board 1, port 0
1222 65 = /dev/ttyF65 IntelliPort II board 1, port 1
1224 127 = /dev/ttyF127 IntelliPort II board 1, port 63
1225 128 = /dev/ttyF128 IntelliPort II board 2, port 0
1226 129 = /dev/ttyF129 IntelliPort II board 2, port 1
1228 191 = /dev/ttyF191 IntelliPort II board 2, port 63
1229 192 = /dev/ttyF192 IntelliPort II board 3, port 0
1230 193 = /dev/ttyF193 IntelliPort II board 3, port 1
1232 255 = /dev/ttyF255 IntelliPort II board 3, port 63
1234 71 block SCSI disk devices (112-127)
1241 Partitions are handled in the same way as for IDE
1245 72 char Computone IntelliPort II serial card - alternate devices
1273 73 char Computone IntelliPort II serial card - control devices
1298 Currently for Dolphin Interconnect Solutions' PCI-SCI
1312 0 = /dev/ttyW0 First IO8+ port, first card
1313 1 = /dev/ttyW1 Second IO8+ port, first card
1315 8 = /dev/ttyW8 First IO8+ port, second card
1328 76 char Specialix IO8+ serial card - alternate devices
1374 79 char PAM Software's multimodem boards - alternate devices
1398 Partitions are handled in the same way as for IDE
1426 Partitions are handled in the same way as for IDE
1444 Partitions are handled in the same way as for IDE
1461 Partitions are handled in the same way as for IDE
1466 0 = /dev/ihcp0 First Greensheet port
1467 1 = /dev/ihcp1 Second Greensheet port
1475 Partitions are handled in the same way as for IDE
1491 Partitions are handled in the same way as for IDE
1506 Partitions are handled in the same way as for IDE
1510 87 char Sony Control-A1 stereo control bus
1521 Partitions are handled in the same way as for IDE
1530 88 block Seventh IDE hard disk/CD-ROM interface
1531 0 = /dev/hdm Master: whole disk (or CD-ROM)
1532 64 = /dev/hdn Slave: whole disk (or CD-ROM)
1538 0 = /dev/i2c-0 First I2C adapter
1539 1 = /dev/i2c-1 Second I2C adapter
1542 89 block Eighth IDE hard disk/CD-ROM interface
1543 0 = /dev/hdo Master: whole disk (or CD-ROM)
1544 64 = /dev/hdp Slave: whole disk (or CD-ROM)
1556 90 block Ninth IDE hard disk/CD-ROM interface
1557 0 = /dev/hdq Master: whole disk (or CD-ROM)
1558 64 = /dev/hdr Slave: whole disk (or CD-ROM)
1563 91 char CAN-Bus devices
1564 0 = /dev/can0 First CAN-Bus controller
1565 1 = /dev/can1 Second CAN-Bus controller
1568 91 block Tenth IDE hard disk/CD-ROM interface
1569 0 = /dev/hds Master: whole disk (or CD-ROM)
1570 64 = /dev/hdt Slave: whole disk (or CD-ROM)
1582 Partitions are handled in the same way as for IDE
1614 96 char Parallel port ATAPI tape devices
1615 0 = /dev/pt0 First parallel port ATAPI tape
1616 1 = /dev/pt1 Second parallel port ATAPI tape
1628 97 char Parallel port generic ATAPI interface
1629 0 = /dev/pg0 First parallel port ATAPI device
1630 1 = /dev/pg1 Second parallel port ATAPI device
1631 2 = /dev/pg2 Third parallel port ATAPI device
1632 3 = /dev/pg3 Fourth parallel port ATAPI device
1653 98 block User-mode virtual block device
1654 0 = /dev/ubda First user-mode block device
1655 16 = /dev/ubdb Second user-mode block device
1658 Partitions are handled in the same way as for IDE
1662 This device is used by the user-mode virtual kernel port.
1665 0 = /dev/parport0 First parallel port
1666 1 = /dev/parport1 Second parallel port
1704 Partitions are handled in the same way as for IDE
1716 write to <arla-[email protected]> or see
1734 105 char Comtrol VS-1000 serial controller
1735 0 = /dev/ttyV0 First VS-1000 port
1736 1 = /dev/ttyV1 Second VS-1000 port
1749 106 char Comtrol VS-1000 serial controller - alternate devices
1750 0 = /dev/cuv0 First VS-1000 port
1751 1 = /dev/cuv1 Second VS-1000 port
1830 0 = /dev/ttyM0 First ISI port
1831 1 = /dev/ttyM1 Second ISI port
1834 There is currently a device-naming conflict between
1846 Partitions are handled in the same way as for IDE
1850 113 char ISI serial card - alternate devices
1855 113 block IBM iSeries virtual CD-ROM
1856 0 = /dev/iseries/vcda First virtual CD-ROM
1857 1 = /dev/iseries/vcdb Second virtual CD-ROM
1873 114 block IDE BIOS powered software RAID interfaces such as the
1886 Partitions are handled in the same way as for IDE
1891 0 = /dev/tipar0 Parallel cable on first parallel port
1893 7 = /dev/tipar7 Parallel cable on seventh parallel port
1895 8 = /dev/tiser0 Serial cable on first serial port
1897 15 = /dev/tiser7 Serial cable on seventh serial port
1903 115 block NetWare (NWFS) Devices (0-255)
1946 The EVMS driver uses a layered, plug-in model to provide
1981 120-127 char LOCAL/EXPERIMENTAL USE
1983 120-127 block LOCAL/EXPERIMENTAL USE
1988 128-135 char Unix98 PTY masters
1994 128 block SCSI disk devices (128-143)
2001 Partitions are handled in the same way as for IDE
2005 129 block SCSI disk devices (144-159)
2012 Partitions are handled in the same way as for IDE
2018 130 block SCSI disk devices (160-175)
2025 Partitions are handled in the same way as for IDE
2029 131 block SCSI disk devices (176-191)
2036 Partitions are handled in the same way as for IDE
2040 132 block SCSI disk devices (192-207)
2047 Partitions are handled in the same way as for IDE
2051 133 block SCSI disk devices (208-223)
2058 Partitions are handled in the same way as for IDE
2062 134 block SCSI disk devices (224-239)
2069 Partitions are handled in the same way as for IDE
2073 135 block SCSI disk devices (240-255)
2080 Partitions are handled in the same way as for IDE
2084 136-143 char Unix98 PTY slaves
2085 0 = /dev/pts/0 First Unix98 pseudo-TTY
2086 1 = /dev/pts/1 Second Unix98 pseudo-TTY
2167 The SST 5136-DN DeviceNet interface driver has been
2170 144 block Expansion Area #1 for more non-device (e.g. NFS) mounts
2174 145 char SAM9407-based soundcard
2195 145 block Expansion Area #2 for more non-device (e.g. NFS) mounts
2199 146 char SYSTRAM SCRAMNet mirrored-memory network
2204 146 block Expansion Area #3 for more non-device (e.g. NFS) mounts
2219 0 = /dev/ttyT0 First TCL port
2220 1 = /dev/ttyT1 Second TCL port
2223 149 char Technology Concepts serial card - alternate devices
2228 150 char Real-Time Linux FIFOs
2266 Partitions are handled in the same way as for IDE
2271 0 = /dev/ttySR0 First RIO port
2273 255 = /dev/ttySR255 256th RIO port
2275 155 char Specialix RIO serial card - alternate devices
2281 0 = /dev/ttySR256 257th RIO port
2283 255 = /dev/ttySR511 512th RIO port
2285 157 char Specialix RIO serial card - alternate devices
2304 160 block Carmel 8-port SATA Disks on First Controller
2315 Partitions are handled in the same way as for IDE
2327 161 block Carmel 8-port SATA Disks on Second Controller
2338 Partitions are handled in the same way as for IDE
2346 164 char Chase Research AT/PCI-Fast serial card
2347 0 = /dev/ttyCH0 AT/PCI-Fast board 0, port 0
2349 15 = /dev/ttyCH15 AT/PCI-Fast board 0, port 15
2350 16 = /dev/ttyCH16 AT/PCI-Fast board 1, port 0
2352 31 = /dev/ttyCH31 AT/PCI-Fast board 1, port 15
2353 32 = /dev/ttyCH32 AT/PCI-Fast board 2, port 0
2355 47 = /dev/ttyCH47 AT/PCI-Fast board 2, port 15
2356 48 = /dev/ttyCH48 AT/PCI-Fast board 3, port 0
2358 63 = /dev/ttyCH63 AT/PCI-Fast board 3, port 15
2360 165 char Chase Research AT/PCI-Fast serial card - alternate devices
2370 167 char ACM USB modems - alternate devices
2381 0 = /dev/ecsa8-0 First CSA8000
2382 1 = /dev/ecsa8-1 Second CSA8000
2393 0 = /dev/ttyMX0 First Moxa port
2394 1 = /dev/ttyMX1 Second Moxa port
2396 127 = /dev/ttyMX127 128th Moxa port
2397 128 = /dev/moxactl Moxa control port
2399 173 char Moxa Intellio serial card - alternate devices
2406 0 = /dev/ttySI0 First SmartIO port
2407 1 = /dev/ttySI1 Second SmartIO port
2410 175 char SmartIO serial card - alternate devices
2448 179 char CCube DVXChip-based PCI products
2493 181 char Conrad Electronic parallel port radio clocks
2503 183 char SST 5136-DN DeviceNet interface
2522 http://inter-mezzo.org/index.html
2524 186 char Object-based storage control device
2541 189 char USB serial converters - alternate devices
2559 193 char Kernel event-tracing interface
2593 49 = /dev/tor/49 First pseudo-channel
2594 50 = /dev/tor/50 Second pseudo-channel
2642 202 char CPU model-specific registers
2654 Partitions are handled in the same way as for IDE
2663 204 char Low-density serial ports
2664 0 = /dev/ttyLU0 LinkUp Systems L72xx UART - port 0
2665 1 = /dev/ttyLU1 LinkUp Systems L72xx UART - port 1
2666 2 = /dev/ttyLU2 LinkUp Systems L72xx UART - port 2
2667 3 = /dev/ttyLU3 LinkUp Systems L72xx UART - port 3
2669 5 = /dev/ttySA0 StrongARM builtin serial port 0
2670 6 = /dev/ttySA1 StrongARM builtin serial port 1
2671 7 = /dev/ttySA2 StrongARM builtin serial port 2
2672 8 = /dev/ttySC0 SCI serial port (SuperH) - port 0
2673 9 = /dev/ttySC1 SCI serial port (SuperH) - port 1
2674 10 = /dev/ttySC2 SCI serial port (SuperH) - port 2
2675 11 = /dev/ttySC3 SCI serial port (SuperH) - port 3
2676 12 = /dev/ttyFW0 Firmware console - port 0
2677 13 = /dev/ttyFW1 Firmware console - port 1
2678 14 = /dev/ttyFW2 Firmware console - port 2
2679 15 = /dev/ttyFW3 Firmware console - port 3
2680 16 = /dev/ttyAM0 ARM "AMBA" serial port 0
2682 31 = /dev/ttyAM15 ARM "AMBA" serial port 15
2683 32 = /dev/ttyDB0 DataBooster serial port 0
2685 39 = /dev/ttyDB7 DataBooster serial port 7
2686 40 = /dev/ttySG0 SGI Altix console port
2687 41 = /dev/ttySMX0 Motorola i.MX - port 0
2688 42 = /dev/ttySMX1 Motorola i.MX - port 1
2689 43 = /dev/ttySMX2 Motorola i.MX - port 2
2690 44 = /dev/ttyMM0 Marvell MPSC - port 0 (obsolete unused)
2691 45 = /dev/ttyMM1 Marvell MPSC - port 1 (obsolete unused)
2692 46 = /dev/ttyCPM0 PPC CPM (SCC or SMC) - port 0
2694 51 = /dev/ttyCPM5 PPC CPM (SCC or SMC) - port 5
2697 148 = /dev/ttyPSC0 PPC PSC - port 0
2699 153 = /dev/ttyPSC5 PPC PSC - port 5
2700 154 = /dev/ttyAT0 ATMEL serial port 0
2702 169 = /dev/ttyAT15 ATMEL serial port 15
2703 170 = /dev/ttyNX0 Hilscher netX serial port 0
2705 185 = /dev/ttyNX15 Hilscher netX serial port 15
2706 186 = /dev/ttyJ0 JTAG1 DCC protocol based serial port emulation
2710 187 = /dev/ttyUL0 Xilinx uartlite - port 0
2712 190 = /dev/ttyUL3 Xilinx uartlite - port 3
2713 191 = /dev/xvc0 Xen virtual console - port 0
2714 192 = /dev/ttyPZ0 pmac_zilog - port 0
2716 195 = /dev/ttyPZ3 pmac_zilog - port 3
2717 196 = /dev/ttyTX0 TX39/49 serial port 0
2719 204 = /dev/ttyTX7 TX39/49 serial port 7
2720 205 = /dev/ttySC0 SC26xx serial port 0
2721 206 = /dev/ttySC1 SC26xx serial port 1
2722 207 = /dev/ttySC2 SC26xx serial port 2
2723 208 = /dev/ttySC3 SC26xx serial port 3
2724 209 = /dev/ttyMAX0 MAX3100 serial port 0
2725 210 = /dev/ttyMAX1 MAX3100 serial port 1
2726 211 = /dev/ttyMAX2 MAX3100 serial port 2
2727 212 = /dev/ttyMAX3 MAX3100 serial port 3
2729 205 char Low-density serial ports (alternate device)
2762 206 char OnStream SC-x0 tape devices
2788 The OnStream SC-x0 SCSI tapes do not support the
2790 their own driver "osst". Note that the IDE, USB (and
2791 maybe ParPort) versions may be driven via ide-scsi or
2792 usb-storage SCSI emulation and this osst device and
2793 driver as well. The ADR-x0 drives are QIC-157
2811 0 = /dev/ttyU0 First user space serial port
2812 1 = /dev/ttyU1 Second user space serial port
2823 2 = /dev/sbei/wan00 WAN device, port 0, board 0
2824 3 = /dev/sbei/wan01 WAN device, port 1, board 0
2825 4 = /dev/sbei/wan02 WAN device, port 2, board 0
2826 5 = /dev/sbei/wan03 WAN device, port 3, board 0
2827 6 = /dev/sbei/wanc00 WAN clone device, port 0, board 0
2828 7 = /dev/sbei/wanc01 WAN clone device, port 1, board 0
2829 8 = /dev/sbei/wanc02 WAN clone device, port 2, board 0
2830 9 = /dev/sbei/wanc03 WAN clone device, port 3, board 0
2833 12 = /dev/sbei/wan10 WAN device, port 0, board 1
2834 13 = /dev/sbei/wan11 WAN device, port 1, board 1
2835 14 = /dev/sbei/wan12 WAN device, port 2, board 1
2836 15 = /dev/sbei/wan13 WAN device, port 3, board 1
2837 16 = /dev/sbei/wanc10 WAN clone device, port 0, board 1
2838 17 = /dev/sbei/wanc11 WAN clone device, port 1, board 1
2839 18 = /dev/sbei/wanc12 WAN clone device, port 2, board 1
2840 19 = /dev/sbei/wanc13 WAN clone device, port 3, board 1
2857 6 = /dev/dvb/adapter0/ca0 first common access port of first card
2859 8 = /dev/dvb/adapter0/osd0 first on-screen-display device of first card
2883 219 char The Logical Company DCI-1300 digital I/O card
2884 0 = /dev/logicalco/dci1300/0 First DCI-1300 card
2885 1 = /dev/logicalco/dci1300/1 Second DCI-1300 card
2911 0 = /dev/ttyY0 First A2232 port
2912 1 = /dev/ttyY1 Second A2232 port
2930 228 char IBM 3270 terminal block-mode access
2937 0 = /dev/hvc0 First console port
2938 1 = /dev/hvc1 Second console port
3008 234-254 char RESERVED FOR DYNAMIC ASSIGNMENT
3012 240-254 block LOCAL/EXPERIMENTAL USE
3027 ---LARGE MAJORS!!!!!---
3029 256 char Equinox SST multi-port serial boards
3030 0 = /dev/ttyEQ0 First serial port on first Equinox SST board
3031 127 = /dev/ttyEQ127 Last serial port on first Equinox SST board
3032 128 = /dev/ttyEQ128 First serial port on second Equinox SST board
3034 1027 = /dev/ttyEQ1027 Last serial port on eighth Equinox SST board
3055 258 block ROM/Flash read-only translation layer
3068 260 char OSD (Object-based-device) SCSI Device
3079 384-511 char RESERVED FOR DYNAMIC ASSIGNMENT
3082 once the 234-254 range is full.