Lines Matching +full:over +full:- +full:current +full:- +full:active +full:- +full:low
5 Contact: linux-[email protected]
14 Contact: linux-[email protected]
23 Contact: linux-[email protected]
32 Contact: linux-[email protected]
43 Contact: linux-[email protected]
47 Reports an average IBAT current reading for the battery, over
54 Reports an average IBUS current reading over a fixed period.
62 batteries and for USB IBUS current.
66 Contact: linux-[email protected]
70 Reports the maximum IBAT current allowed into the battery.
74 Reports the maximum IBUS current the supply can support.
81 Contact: linux-[email protected]
86 Reports an instant, single IBAT current reading for the
93 Reports the IBUS current supplied now. This value is generally
94 read-only reporting, unless the 'online' state of the supply
102 batteries and for USB IBUS current.
106 Contact: linux-[email protected]
110 Reports the current TBAT battery temperature reading.
114 Reports the current supply temperature reading. This would
124 Contact: linux-[email protected]
128 Maximum TBAT temperature trip-wire value where the supply will
129 notify user-space of the event.
133 Maximum supply temperature trip-wire value where the supply
134 will notify user-space of the event.
137 user-space needs to know if the temperature has crossed an
148 Contact: linux-[email protected]
153 Minimum TBAT temperature trip-wire value where the supply will
154 notify user-space of the event.
158 Minimum supply temperature trip-wire value where the supply
159 will notify user-space of the event.
161 This is normally used for the charging scenario where user-space
164 temperature level is high, and charging current has been
173 Contact: linux-[email protected]
190 Contact: linux-[email protected]
207 Contact: linux-[email protected]
224 Contact: linux-[email protected]
241 Contact: linux-[email protected]
253 read-only reporting, unless the 'online' state of the supply
265 Contact: linux-[email protected]
271 Valid values: 0 - 100 (percent)
275 Contact: linux-[email protected]
277 Maximum battery capacity trip-wire value where the supply will
278 notify user-space of the event. This is normally used for the
279 battery discharging scenario where user-space needs to know the
282 low).
286 Valid values: 0 - 100 (percent)
290 Contact: linux-[email protected]
292 Minimum battery capacity trip-wire value where the supply will
293 notify user-space of the event. This is normally used for the
294 battery discharging scenario where user-space needs to know the
297 critically low).
301 Valid values: 0 - 100 (percent)
305 Contact: linux-[email protected]
310 Values close to 0% will be returned after (re-)calibration
311 has happened. Over time the error margin will increase.
317 Valid values: 0 - 100 (percent)
321 Contact: linux-[email protected]
328 "Unknown", "Critical", "Low", "Normal", "High",
333 Contact: linux-[email protected]
335 Maximum allowable charging current. Used for charge rate
344 Contact: linux-[email protected]
354 Contact: linux-[email protected]
360 Valid values: 0 - 100 (percent)
364 Contact: linux-[email protected]
374 Valid values: 0 - 100 (percent)
378 Contact: linux-[email protected]
385 Quickly charge the battery using fast-charge
410 Reading this returns the current active value, e.g. 'Standard'.
419 Contact: linux-[email protected]
422 charge-types with the currently active type surrounded by square
427 always have the same active value and the active value can be
430 Note charge-types which contain a space such as "Long Life" will
432 When writing charge-types both variants are accepted.
436 Contact: linux-[email protected]
438 Reports the charging current value which is used to determine
447 Contact: linux-[email protected]
456 "Over voltage", "Under voltage", "Unspecified failure", "Cold",
458 "Over current", "Calibration required", "Warm",
463 Contact: linux-[email protected]
465 Reports the charging current applied during pre-charging phase
474 Contact: linux-[email protected]
490 Contact: linux-[email protected]
493 is read-only reporting although for some supplies this can be
504 Contact: linux-[email protected]
513 inhibit-charge: Do not charge while AC is attached
514 force-discharge: Force discharge while AC is attached
519 Contact: linux-[email protected]
526 "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
532 Contact: linux-[email protected]
534 Reports an average VBAT voltage reading for the battery, over a
544 Contact: linux-[email protected]
559 Contact: linux-[email protected]
561 Details the incoming IBUS current limit currently set in the
564 of 500mA so the input current limit is set to the same value).
574 Contact: linux-[email protected]
578 system-level knowledge or user input (e.g. This is part of the
592 Contact: linux-[email protected]
596 system-level knowledge or user input. Use preferably this
597 feature to limit the incoming power and use current/voltage
606 Contact: linux-[email protected]
610 between online states (e.g. Fixed -> Programmable for a PD_PPS
611 USB supply so voltage and current can be controlled).
619 1: Online Fixed - Fixed Voltage Supply
620 2: Online Programmable - Programmable Voltage Supply
625 Contact: linux-[email protected]
627 Reports what type of USB connection is currently active for
628 the supply, for example it can show if USB-PD capable source
631 Access: For power-supplies which consume USB power such
633 the connected USB power source and is Read-Only.
635 For power-supplies which act as a USB power-source such as
644 What: /sys/class/power/ds2760-battery.*/charge_now
649 This file is writeable and can be used to set the current
656 What: /sys/class/power/ds2760-battery.*/charge_full
663 amended over time.
665 What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer
671 charger operates in fast-charge mode. When the timer expires
672 the device will terminate fast-charge mode (charging current
677 - 5, 6 or 7 (hours),
678 - 0: disabled.
680 What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
686 charger operates in fast-charge mode. When the timer expires
687 the device will terminate fast-charge mode (charging current
692 - 4 - 16 (hours), step by 2 (rounded down)
693 - 0: disabled.
695 What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
700 This entry shows and sets the charging current threshold for
701 entering top-off charging mode. When charging current in fast
703 interrupt and start top-off charging mode.
707 - 100000 - 200000 (microamps), step by 25000 (rounded down)
708 - 200000 - 350000 (microamps), step by 50000 (rounded down)
709 - 0: disabled.
711 What: /sys/class/power_supply/max77693-charger/device/top_off_timer
717 charger operates in top-off charge mode. When the timer expires
718 the device will terminate top-off charge mode (charging current
723 - 0 - 70 (minutes), step by 10 (rounded down)
725 What: /sys/class/power_supply/bq24257-charger/ovp_voltage
730 This entry configures the overvoltage protection feature of bq24257-
737 - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
740 What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage
746 bq24257-type charger devices. Once the supply drops to the configured
747 voltage, the input current limit is reduced down to prevent the further
748 drop of the supply. When the IC enters this mode, the charge current is
753 - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
756 What: /sys/class/power_supply/bq24257-charger/high_impedance_enable
761 This entry allows enabling the high-impedance mode of bq24257-type
762 charger devices. If enabled, it places the charger IC into low power
768 - 1: enabled
769 - 0: disabled
771 What: /sys/class/power_supply/bq24257-charger/sysoff_enable
776 This entry allows enabling the sysoff mode of bq24257-type charger
784 - 1: enabled
785 - 0: disabled
789 Contact: linux-[email protected]
800 Contact: linux-[email protected]
806 Valid values: 1-12
810 Contact: linux-[email protected]
815 Valid values: 1-31
819 Contact: linux-[email protected]