Lines Matching +full:differential +full:- +full:pair

3 Contact:	linux-[email protected]
11 Contact:	linux-[email protected]
16 		MTCLKA-MTCLKB:
20 		MTCLKC-MTCLKD:
26 Contact:	linux-[email protected]
33 Contact:	linux-[email protected]
39 Contact:	linux-[email protected]
45 Contact:	linux-[email protected]
52 Contact:	linux-[email protected]
59 Contact:	linux-[email protected]
78 		non-recycle:
80 			underflow takes place. The counter is re-enabled when a
84 		modulo-n:
99 		hardware retriggerable one-shot:
106 			the one-shot pulse.
153 Contact:	linux-[email protected]
161 Contact:	linux-[email protected]
163 		Read-only attribute that indicates the count direction of Count
174 Contact:	linux-[email protected]
188 Contact:	linux-[email protected]
190 		Read-only attribute that indicates whether excessive noise is
195 Contact:	linux-[email protected]
207 		pulse-direction:
212 			If direction is forward, rising edges on quadrature pair
214 			is backward, falling edges on quadrature pair signal A
219 			If direction is forward, rising edges on quadrature pair
221 			is backward, falling edges on quadrature pair signal B
226 			Any state transition on quadrature pair signal A updates
231 			Any state transition on quadrature pair signal B updates
236 			Any state transition on either quadrature pair signals
242 Contact:	linux-[email protected]
244 		Read-only attribute that indicates the device-specific name of
250 Contact:	linux-[email protected]
259 Contact:	linux-[email protected]
261 		If the counter device supports preset registers -- registers
262 		used to load counter channels to a set count upon device-defined
263 		preset operation trigger events -- the preset count for channel
268 Contact:	linux-[email protected]
275 Contact:	linux-[email protected]
284 			Pulse-Direction count function mode, this Signal is
298 Contact:	linux-[email protected]
324 Contact:	linux-[email protected]
326 		Read-only attribute that indicates the component ID of the
331 Contact:	linux-[email protected]
340 Contact:	linux-[email protected]
344 		rounded-up to a power of 2.
348 Contact:	linux-[email protected]
350 		Read-only attribute that indicates the device-specific name of
356 Contact:	linux-[email protected]
358 		Read-only attribute that indicates the total number of Counts
363 Contact:	linux-[email protected]
365 		Read-only attribute that indicates the total number of Signals
370 Contact:	linux-[email protected]
372 		Read-only attribute that indicates whether a differential
380 Contact:	linux-[email protected]
382 		Whether detection of differential encoder cable faults for the
388 Contact:	linux-[email protected]
391 		affects the inputs of both quadrature pair signals.
395 Contact:	linux-[email protected]
398 		non-synchronous load mode.
403 Contact:	linux-[email protected]
410 Contact:	linux-[email protected]
423 Contact:	linux-[email protected]
425 		Read-only attribute that indicates the device-specific name of
431 Contact:	linux-[email protected]
444 Contact:	linux-[email protected]
447 		non-synchronous or synchronous load mode. Synchronous load mode
448 		cannot be selected in non-quadrature (Pulse-Direction) clock
451 		non-synchronous:
466 Contact:	linux-[email protected]
468 		Read-only attribute that indicates the signal Y frequency, in Hz.