Lines Matching full:pages

3 sg_logs \- access log pages with SCSI LOG SENSE command
39 outputs the response. The LOG SENSE command is used to fetch log pages which,
62 supported log pages (but not subpages) are listed out.
68 fetch and decode all the log pages and subpages supported by the \fIDEVICE\fR.
69 This requires a two stage process: first the "supported log pages and
75 Since some vendors don't list all log pages in the "supported log pages and
77 merge both "supported ..." log pages then, from that resultant merged list,
85 outputs all the log pages supported by the \fIDEVICE\fR. This requires a two
86 stage process: first the "supported log pages" log page is fetched, then for
88 displayed. When used twice (e.g. '\-aa') all log pages and subpages are
94 shorten the amount of output for some log pages. For example the Tape
113 tables about known log pages including their name, acronym and fields. If
115 all known pages are listed, sorted in ascending alphabetical acronym order.
117 When given twice, vendor pages are excluded.  When given three times, all
118 known pages are listed, sorted in ascending numeric order listed; when given
119 four times, vendor pages are excluded from the numeric order.
125 this option excludes vendor specific pages and parameters from the output.
126 Trying to decode vendor specific pages and parameters does not necessarily
127 work well for many reasons. This option limits the output to pages and
142 is given then the log parameter is output in binary. Most log pages contain
144 convention are those pages that list supported log pages (and subpages).
147 pdt value and only log pages associated with that pdt plus generic pages
150 then only generic pages listed in SPC are enumerated. If \fIFL\fR is \-10
151 then only generic direct access like (e.g. disk) pages are enumerated. If
152 \fIFL\fR is \-11 then only generic tape like pages (e.g. includes ADC)
159 When this option is given, the application client log pages is fully
204 lists the names of the logs sense pages supported by this device. This is
205 done by reading the "supported log pages" log page. When used once only
206 log pages, but not subpages, are listed. When used twice the "supported
207 log pages and subpages" log page is output. Some vendors do not list some
208 log pages (e.g. those without any subpages) in the "supported log pages
210 three times (e.g. '\-lll') and the output of the two log pages is merged.
211 Even if the "supported log pages and subpages" log page is not supported
213 pages" log page. In the absence of other options, the page/subpage names,
217 contents of all pages referred to in either the "supported log page" or
218 the "supported log page and subpage" log pages.
233 decode some log pages into 'name=value' entries, one per line. The name
250 not be able to differentiate between some log pages that are device
274 For log pages that have parameter codes, the \fIDEVICE\fR should return
314 pages (or the given page). Exactly what is reset depends on the accompanying
318 counter log pages but leaves pages like self\-test results, start\-stop cycle
319 counter and temperature log pages unaffected. This option may be required to
320 clear log pages if a counter reaches its maximum value since the log page in
409 This utility will usually do a double fetch of log pages with the SCSI LOG
418 Various log pages hold information error rates, device temperature, start
425 The simplest way to find which log pages can be decoded by this utility is
430 Vendors are specifically permitted by the SPC\-6 to _not_ report all pages
431 and subpages supported by a device. That weakens the usefulness of the pages
432 that report a list of supported pages and subpages. One guarantee which is
433 given is that the pages reported shall be in ascending order.
448 outputs all the log pages supported by the \fIDEVICE\fR.
452 outputs all the log pages and subpages supported by the \fIDEVICE\fR.
462 enumerate internal tables to show information about known log pages.
469 suppresses decoding of known log sense pages and prints out the
482 lists the names of all logs sense pages supported by this \fIDEVICE\fR.
486 lists the names of all logs sense pages and subpages supported by this
522 use SCSI LOG SELECT command (PCR bit set) to reset the all log pages (or